MP324 Tank Shear

MP324 Tank Shear

Cat® Multi-Processors accept multiple interchangeable jaws for a wide range of demolition tasks. Faster cycle times get your jobs done quicker. Greater power means taking on bigger jobs. Quick jaw change gives you the right tool for the task at hand, without slowing you down. All built on a durable, easy to maintain platform.

Cycle Time - Open 1.8 s 1.8 s
Excavator Minimum 24 tons 24 tons
Cycle Time - Close 1.2 s 1.2 s

ტექნიკური მახასიათებლები

Performance
Cycle Time - Open 1.8 s 1.8 s
Cycle Time - Close 1.2 s 1.2 s
Cutting Force - Blade Throat 488 Sh Ton 4344 kN
Cutting Force - Blade Center 213 Sh Ton 1894 kN
Cutting Force - Blade Tip 174 Sh Ton 1550 kN
Recommended Carrier Weight
Excavator Minimum 24 tons 24 tons
Excavator Maximum 35 tons 35 tons
Hydraulic Requirements
Jaw Circuit - Max. Oil Pressure 5076 psi 350 bar
Jaw Circuit - Max. Oil Flow 59 gal/min 225 l/min
Rotation Circuit - Max. Oil Pressure 2031 psi 160 bar
Rotation Circuit - Max. Oil Flow 11 gal/min 40 l/min
Dimensions - Jaw
Jaw Depth 19.3 in 490 mm
Cutter Length 17.3 in 439 mm
Jaw Opening - Maximum 19.1 in 485 mm
Jaw Width - Fixed 11.3 in 286 mm
Jaw Width - Moveable 4.7 in 120 mm
Dimensions - Housing + Jaw
Width 83.8 in 2129 mm
Length 61.9 in 1571 mm
Height 31.2 in 793 mm
Weight
Weight - Housing, Jaw and Bracket 6113 lb 2773 kg
Weight - Jaw Only 2487 lb 1128 kg

უპირატესობები და მახასიათებლები

Cycle Times are 50 Percent Faster

  • New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
  • You’ll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there’s no load.
  • Maximum crushing/cutting force is applied as soon as the jaw contacts material.

Up to 19 Percent More Force

  • Process more per hour, ship more per shift, make more every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
  • Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
  • Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.

Change Jaws in 15 minutes

  • Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
  • Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
  • MP324 accepts these jaw types:
    • Concrete Cutter – outer jaw cracks concrete; inner shear jaw cuts steel
    • Demolition – opens wide to crack the largest concrete structures
    • Pulverizer – crushes concrete, separating the rebar
    • Secondary Pulverizer – crushes concrete into finer particles; total rebar separation
    • Shear – cuts structural steel, pipe, and cable
    • Tank Shear – cuts at right angle on three sides, cleanly cutting tanks or plate steel
    • Universal – innovative design cuts steel and crushes concrete

Durable and Maintainable

  • Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
  • Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
  • Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.