MP332 Pulverizer Jaw

MP332 Pulverizer Jaw

Cat® Multi-Processors accept multiple interchangeable jaws for a wide range of demolition tasks. Faster cycle times get your jobs done quicker. Greater power means taking on bigger jobs. Quick jaw change gives you the right tool for the task at hand, without slowing you down. All built on a durable, easy to maintain platform.

Cycle Time - Open 1.9 s 1.9 s
Excavator Minimum 32 tons 32 tons
Cycle Time - Close 1.3 s 1.3 s

ტექნიკური მახასიათებლები

Performance
Cycle Time - Open 1.9 s 1.9 s
Cycle Time - Close 1.3 s 1.3 s
Crushing Force - Primary Cutter 556 Sh Ton 4947 kN
Crushing Force - Cutter Tip 221 Sh Ton 1962 kN
Crushing Force - Tooth Tip 162 Sh Ton 1439 kN
Recommended Carrier Weight
Excavator Minimum 32 tons 32 tons
Excavator Maximum 50 tons 50 tons
Hydraulic Requirements
Jaw Circuit - Max. Oil Pressure 5076 psi 350 bar
Jaw Circuit - Max. Oil Flow 74 gal/min 280 l/min
Rotation Circuit - Max. Oil Pressure 2321 psi 160 bar
Rotation Circuit - Max. Oil Flow 11 gal/min 40 l/min
Dimensions - Jaw
Jaw Depth 33.1 in 840 mm
Cutter Length 7.9 in 200 mm
Jaw Opening - Maximum 41.8 in 1062 mm
Jaw Width - Fixed 19.7 in 500 mm
Jaw Width - Moveable 12.3 in 313 mm
Dimensions - Housing + Jaw
Length 89.6 in 2277 mm
Height 74 in 1879 mm
Width 39.6 in 1005 mm
Weight
Weight - Housing, Jaw and Bracket 7419 lb 3365 kg
Weight - Jaw Only 3294 lb 1494 kg

უპირატესობები და მახასიათებლები

Cycle Times are 50 Percent Faster

  • New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
  • You’ll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there’s no load.
  • Maximum crushing/cutting force is applied as soon as the jaw contacts material.

Up to 19 Percent More Force

  • Process more per hour, ship more per shift, make more every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
  • Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
  • Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.

Change Jaws in 15 Minutes

  • Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
  • Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
  • MP332 accepts these jaw types:
    • Concrete Cutter – outer jaw cracks concrete; inner shear jaw cuts steel
    • Demolition – opens wide to crack the largest concrete structures
    • Pulverizer – crushes concrete, separating the rebar
    • Shear – cuts structural steel, pipe, and cable
    • Tank Shear – cuts at right angle on three sides, cleanly cutting tanks or plate steel
    • Universal – innovative design cuts steel and crushes concrete

Durable and Maintainable

  • Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
  • Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
  • Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.