ტექნიკური მახასიათებლები
| Gross Power (SAE J1995:2014) | 562 HP 419 kW |
| Net Power (SAE J1349:2011) | 496 HP 370 kW |
| Net Power (ISO 9249:2007) | 502 HP 374 kW |
| Engine Model | C18 C18 |
| Emissions | U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 |
| Rated Speed | 1900 r/min 1900 r/min |
| Torque Rise | 52 52 |
| Bore | 5.71 in 145 mm |
| Stroke | 7.2 in 183 mm |
| Displacement | 1104.5 in³ 18.1 l |
| High Idle Speed | 2120 r/min 2120 r/min |
| Low Idle Speed | 750 r/min 750 r/min |
| Maximum Altitude without Derating | 7500 ft 2286 m |
| Note | *Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. *Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. |
| Maximum Operating Weight (Tier 3/Stage IIIA equivalent) | 125622 lb 56982 kg |
| Transmission Type | Planetary - Powershift - ECPC Planetary - Powershift - ECPC |
| Direct Drive - Forward 1 | 4.3 mile/h 7 km/h |
| Direct Drive - Forward 2 | 7.8 mile/h 12.6 km/h |
| Direct Drive - Reverse 1 | 4.6 mile/h 7.4 km/h |
| Direct Drive - Reverse 2 | 8.2 mile/h 13.2 km/h |
| Steering System - Circuit | Flow Sharing Implement; Pilot, load sensing Flow Sharing Implement; Pilot, load sensing |
| Steering System - Pump | Piston – Variable Displacement Piston – Variable Displacement |
| Relief Valve Setting - Steering | 3495 lb/in² 24100 kPa |
| Total Steering Angle | 86 86 |
| Steering Cycle Times - High Idle | 3.9 s 3.9 s |
| Steering Cycle Times - Low Idle | 6.4 s 6.4 s |
| Fuel Tank | 209 gal (US) 793 l |
| Diesel Exhaust Fluid Tank* | 9 gal (US) 32.8 l |
| Cooling Systems - Tier 4 Final/EU Stage V | 40 gal (US) 151.5 l |
| Cooling System - Tier 3/Stage IIIA Equivalent | 37.2 gal (US) 141.1 l |
| Engine Crankcase | 16 gal (US) 60 l |
| Transmission | 21.9 gal (US) 83 l |
| Differential - Final Drives - Front | 49 gal (US) 186 l |
| Differential - Final Drives - Rear | 50 gal (US) 190 l |
| Hydraulic System - Implement/Steering | 46.2 gal (US) 175 l |
| Hydraulic Tank Only | 27.2 gal (US) 103 l |
| Front | Planetary – Fixed Planetary – Fixed |
| Rear | Planetary – Oscillating Planetary – Oscillating |
| Oscillation Angle | ±6° ±6° |
| Service Brakes | Multi Disc Wet (Enclosed) 2 WHL Multi Disc Wet (Enclosed) 2 WHL |
| Parking Brake | Spring Applied, Hydraulic Released Spring Applied, Hydraulic Released |
| Operator Sound Level (ISO 6396) | 72 dB(A) 72 dB(A) |
| Machine Sound Level (ISO 6395) | 111 dB(A) 111 dB(A) |
| Operator Sound Level (ISO 6396) | 72 dB(A) 72 dB(A) |
| Machine Sound Level (ISO 6395) | 109 dB(A) 109 dB(A) |
| Height to Top of Beacon | 15.2 ft 4634 mm |
| Height to Top of Air Conditioning Condenser | 15.2 ft 4626 mm |
| Height - Cab Roof | 14.1 ft 4285 mm |
| Height - Top of Exhaust Pipe | 15.1 ft 4606 mm |
| Height - Top of Hood | 11.3 ft 3430 mm |
| Ground Clearance to Hitch | 2.1 ft 639 mm |
| Ground Clearance to Bottom of Bumper | 3.2 ft 965 mm |
| Centerline of Rear Axle to Rear Compactor Guard | 11.3 ft 3454 mm |
| Hitch to Centerline of Front Axle | 7.5 ft 2275 mm |
| Wheel Base | 14.9 ft 4550 mm |
| Width over Front Striker Bars | 12.9 ft 3930 mm |
| Width over Rear Striker Bars | 12.9 ft 3933 mm |
| Width over Platform | 10.5 ft 3196 mm |
| Width over Drums | 14 ft 4280 mm |
| Capacity | 25.9 yd³ 19.3 m³ |
| Height | 7.3 ft 2239 mm |
| Height of Cutting Edge | 7.3 ft 1125 mm |
| Capacity | 29.3 yd³ 22.4 m³ |
| Height | 7.3 ft 2239 mm |
| Capacity | 33.6 yd³ 25.5 m³ |
| Height | 7.4 ft 2255 mm |
უპირატესობები და მახასიათებლები
OPERATOR COMFORT AND CONTROL
- Flip-up armrest for easy ingress/egress.
- Keep your operators informed about machine conditions and operation with Vital Information Management System (VIMS™) 3G machine monitoring system.
- Enhanced visibility with standard rearview camera.
- Preferred temperature settings maintained with automatic climate control.
- Cat Premium Plus seat with standard features including leather finish, forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening to provide total comfort throughout the workday.
- Increased forward visibility with lowered glass for better visibility to the blade and wheels.
BECAUSE UPTIME COUNTS
- Easy access and in a controlled environment; electronics bay is located inside the cab.
- Focused on safety with ground level or platform access to most major components.
- Ground level: emergency shutdown, battery disconnect, and jump start.
- Quick visual inspection and minimize fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
- Electronic air inlet restriction indicator.
- Designed for ease of service and inspection
– Hydraulic oil cooler, fuel cooler, and roof-mounted condenser
– Centralized grease points - Operators and technicians can resolve any problems before failure using VIMS.
- Underhood lighting for improved visibility of service points.
- Improved guarding around the axles mitigates risk of damaged components.
- Improved radiator air inlet door sealing to reduce radiator cleanout.
- Remaining useful life of the engine air filter allows for better planning of maintenance and repair activities.
POWERFUL EFFICIENCY
- Improved performance, long life, low emissions.
- High productivity and fuel efficient.
- Two engine options available that meet U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards or Brazil MAR-1 and China Nonroad Stage III emission standards, U.S. EPA Tier 3 and EU Stage IIIA equivalent.
- For the Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing selective catalytic reduction (SCR) technology.
- Regeneration is completely automatic and does not interrupt the machine’s work cycle.
- Experience maximum responsiveness and control with Steering and Transmission Integrated Control System (STIC™).
- Conserve more fuel with the automatic engine and electrical system shutdown.
- Achieve greater momentum on grades and fuel savings by carrying that momentum through the shift points advanced productivity electronic control system (APECS) transmission controls.
- Operators experience less fatigue with throttle lock to maintain engine speed.
- Equipped with Cat torque converter with lock-up clutch which eliminates torque converter (TC) losses while lowering system heat and transfers more power to the ground.
- Improved direction shift speed with new Cat locker differentials.
- Diesel exhaust fluid (DEF) injector phase change tank to reduce engine idle time at shutdown.
- Increase machine tarp lift capability to eliminate need for track type tractor to carry tarp rolling equipment for end of day landfill cover.
PRODUCTIVITY WITH TECHNOLOGY
- Compact technology combines advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes – saving on fuel and the cost of unnecessary rework.
- Link technology (standard) provides access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes through the online VisionLink® interface.
- Improved productivity with standard Cat Compact with Pass Mapping and 10" display.
- Slope indicate feature improves construction of slopes and identifies when risk for fluid cavitation occurs.
- Improved productivity with optional Cat Compact with Elevation Mapping.
LONG TERM VALUE AND DURABILITY
- Larger diameter axle shafts, the Cat locker differentials, improved duo cone labyrinth, thicker wheel at the spindle for increased strength.
- Improved final drive gear set to reduce stress and enhance pitting life.
- Fan motor guard to prevent bag wrapping.
- 5" higher efficiency fuel filter for cleaner fuel to the engine.
WHEEL TIPS BUILT TO PERFORM
- Designed specifically to complement Cat machines.
- Improves machine performance through longer wear life and maintaining traction.
- Five wheel and tip configurations are available to meet your particular application:
1) Paddle Tip – High performance and less fuel burn with more traction and less weight.
2) Plus Tip – Traditional design for increased side slope stability.
3) Combination Tip – Both paddle and plus tips provide the best compromise of performance and fuel economy with side slope stability.
4) Diamond Tip – Longest life tip on the market with reputation of reliability that is world class in the waste tip industry.
5) Chopper Tip – These types of tips are recommended for wet/soft waste where chopping and/or traction is a large concern and abrasive wear life is not a major concern.
სტანდარტული ტექნიკა
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
POWER TRAIN
- Advanced Productivity Electronic Control Shifting (APECS)
- Air to air aftercooler
- Brakes, fully hydraulic, enclosed, wet multiple disc brakes
- Cat Clean Emission Module, insulated (Tier 4 Final/Stage V/Korea Stage V and Japan 2014)
- Electro hydraulic parking brake
- Engine, Cat C18: – Tier 4 Final/Stage V/Korea Stage V and Japan 2014 – Tier 3/Stage IIIA equivalent
- Fuel priming pump, electric
- Fuel to air cooler
- Ground level engine shutoff
- Guard (3 piece) transmission
- Heat shield, turbo and exhaust manifold
- Hydraulically driven demand fan
- Integrated braking
- Radiator, Aluminum Modular Radiator (AMR)
- Separated cooling system
- Starting aid (ether) automatic
- Throttle lock
- Torque converter with lockup clutch (LUC)
- Turbine precleaner, engine air intake
- Transmission, planetary, with 2F/2R speed range control
- Underhood ventilation system
-
ELECTRICAL
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance-free (4-1,000 CCA)
- Converter, 10-15 amp, 24V to 12V
- Lighting system, halogen (front and rear)
- Lighting, access stairway
- Starter, electric (heavy duty)
- Starter lockout (ground level)
- Starting receptacle for emergency start
- Transmission lockout (ground level)
-
OPERATOR ENVIRONMENT
- Air conditioner w/roof-mounted condenser
- Cab, sound-suppressed and pressurized
- Internal four-post rollover protective structure (ROPS/FOPS)
- Radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp) 12V power port for mobile phone or laptop connection
- Camera, rear vision
- Coat and hard hat hooks
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Hydraulic controls (floor mounted)
- Implement hydraulic lockout
- Laminated glass
- Light, (dome) cab
- Lunchbox and beverage holders
- Instrumentation, Gauges: – DEF fluid level (Tier 4 Final/Stage IV) – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, Warning Indicators: – Action alert system, three category – Axle/brake oil temp, front – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp
- Mirrors, rearview (externally mounted)
- Parking brake status
- Radio, CB (ready)
- Seat, Cat Comfort, (cloth) air suspension
- Seat belt, retractable, 76 mm (3") wide
- STIC Control System with steering lock
- Sun visor, front
- Glass (window) - rubber mounted glass
- Transmission gear (indicator)
- Vital Information Management System (VIMS) with graphical information display: external data port, customizable operator profiles
- Wet-arm wipers/washers (front and rear)
- Intermittent wipers (front and rear)
-
WHEELS
- Wheels, paddle, plus, combination, and diamond wheel configurations
-
GUARDS
- Guards, axle (front and rear)
- Guards, cab window
- Guards, crankcase and power train, hydraulically powered
- Guards, rear fan and grill
-
BLADES
- Bulldozer arrangement is included in the standard equipment. Bulldozer blades are optional.
-
FLUIDS
- Antifreeze, premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
-
OTHER STANDARD EQUIPMENT
- Auto Blade Positioner (ABP)
- Demand fan/swing out (hydraulic reversible)
- Doors, service access locking
- Ecology drains for engine, radiator, hydraulic tank
- Electronic clutch pressure control and remote mounted pressure taps
- Emergency platform egress
- Engine, crankcase, 500 hour interval with CJ-4 oil
- Fuel tank, 793 L (210 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Hydraulic oil cooler
- Hydraulic, steering and brake filtration/screening system
- Oil sampling valves
- Product Link™ - Cellular
- Stairways, fixed-L/R (rear access)
- Steering, load sensing
- Vandalism protection caplocks
- Venturi stack
აირჩიეთ ტექნიკა
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
Various blades:
- Straight blade
- U-blade
- Semi U-blade
-
Various tip and wheel arrangements:
- Paddle
- Plus
- Diamond
