C3.6

C3.6

The Cat® C3.6 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 100 bkW (134 bhp) @ 2200 rpm. The C3.6 is designed to meet the needs of many industries and applications, including excavators, agricultural tractors, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.

Maximum Power 134 hp 100 kW
Maximum Torque 406 lb-ft @ 1500 rpm 550 Nm @ 1500 rpm
Emissions U.S. EPA & CARB Tier 4 Final, EU Stage V U.S. EPA & CARB Tier 4 Final, EU Stage V

Technicial Specifications

Power Rating
Maximum Power 134 hp 100 kW
Maximum Torque 406 lb-ft @ 1500 rpm 550 Nm @ 1500 rpm
Rated Speed 2000-2400 rpm 2000-2400 rpm
Minimum Power 74 hp 55 kW
Emission Standards
Emissions U.S. EPA & CARB Tier 4 Final, EU Stage V U.S. EPA & CARB Tier 4 Final, EU Stage V
General
Engine Configuration In-Line 4 In-Line 4
Bore 3.9 in 98 mm
Stroke 4.7 in 120 mm
Displacement 220 in³ 3.6 l
Compression Ratio 17.0:1 17.0:1
Aspiration Turbocharged-Aftercooled (TA) Turbocharged-Aftercooled (TA)
Combustion System Direct Injection Direct Injection
Rotation from Flywheel End Counterclockwise Counterclockwise
Aftertreatment DOC+DPF or DOC+DPF+SCR DOC+DPF or DOC+DPF+SCR
Engine Dimensions - Approximate
Length 26.3 in 667 mm
Width 22.2 in 564 mm
Height 31 in 787 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 840 lb 381 kg

Advantages and Features

Installation

Smaller in size than it's predecessor, the Cat C3.6 is a powerful engine in a compact and easily integrated size that saves OEMs valuable time and costs. With flexible aftertreatment mounting options and a simplfied engine installation process, the C3.6 can be placed into a wide variety of applications with agility and speed.

Advanced Features

What would you do with 5% more power density and 12% more torque? The C3.6 uses the latest in technology to bring OEMs the most efficient and powerful engine—even at peak performance—when compared to the previous engine model.

Broad Application Range

The Cat® C3.6 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards

Ideal for industrial, agricultural and construction applications such as:

• Excavators
• Pumps
• Compressors
• Chippers
• Grinders
• Asphalt paving equipment
• Hydraulic power unit
• Bore rigs
• Drill rigs
• Tractors
• Telehandlers
 

Total Cost of Ownership

Owning and operating equipment is a big investment, so it only makes sense to get the most you can from it. Thanks to the chosen technologies of the Cat C3.6, owners can experience an overall savings in fluid.

Cat Dealer Product Support

Backed by a five-year warranty, the Cat C3.6 is also supported by Caterpillar's unmatched Dealer Support Network with over 171 locations in 192 countries across the world—so the expert assistance you need is always close by.

Safety

Safety on the job site matters. The Cat C3.6 is 3 decibles quieter output than the previous engine equivalent, meaning less noise from the engine and a more alert and attentive operator.

Standard Equipment

  • Control System
    • Starter motor (12V or 24V)
    • Alternator (12V or 24V)
    • Electronic Control Unit (chassis mounted)
    • Engine control sensors and robust wiring harness
    • Data interface via CANbus J1939
  • Flywheels and Flywheel Housing
    • Flywheel housings – SAE 3 or SAE 4
    • Choice of flywheel to match industry common hydraulic pumps and transmissions
    • Side PTO with SAE A or SAE B interface
  • Fuel System
    • Fuel filter – preconnected but chassis mounted
    • With water sensor
  • Lube System
    • Lubricating oil filters
    • High incline oil pan – 35° continuous in all directions
  • General
    • Cold start capability to -20° C (-4° F) with standard equipment
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment
    • Diesel Oxidation Catalyst (DOC)
    • Selective Catalytic Reduction (SCR)
    • SCR Auxiliaries

WhatsApp WhatsApp