ტექნიკური მახასიათებლები
| Tractor Engine | Cat® C18 Cat® C18 |
| Flywheel Power - Tractor/Scraper | 469kW (629 hp) 469kW (629 hp) |
| Bore | 5.7 in 145 mm |
| Stroke | 7.2 in 183 mm |
| Displacement | 1105 in³ 18.1 l |
| Net Power (SAE J1349/ISO 9249) | 592 hp 436 kW |
| Gross Power (SAE J1995) | 637 hp 475 kW |
| Net Power (ISO 14396) | 585 hp 436 kW |
| Net Power | 469 kW/629 hp (ISO 14369:2002) 469 kW/629 hp (ISO 14369:2002) |
| Scraper Capacity - Heaped | 44 yd³ 33.6 m³ |
| Rated Load | 104000 lb 47174 kg |
| Capacity - Struck | 32 yd³ 24.5 m³ |
| Depth of Cut - Maximum | 17.3 in 417 mm |
| Width - Cut - To Router Bits | 12.5 ft 3.8 m |
| Ground Clearance - Maximum | 2.3 ft 0.7 m |
| Depth of Spread - Maximum | 26 in 660 mm |
| Apron Opening | 92 in 2337 mm |
| Apron Closure Force | 39200 lb 176 kN |
| Hyd. Penetration Force - 657G | 121000 lb 542 kN |
| Top Speed - Loaded | 34.9 mile/h 56.1 km/h |
| 1 Forward | 3.5 mile/h 5.7 km/h |
| 2 Forward | 6.5 mile/h 10.5 km/h |
| 3 Forward | 7.8 mile/h 12.5 km/h |
| 4 Forward | 10.6 mile/h 17 km/h |
| 5 Forward | 14.2 mile/h 22.8 km/h |
| 6 Forward | 19.2 mile/h 30.9 km/h |
| 7 Forward | 25.7 mile/h 41.4 km/h |
| 8 Forward | 34.9 mile/h 56.1 km/h |
| Reverse | 6.7 mile/h 10.8 km/h |
| Total Shipping | 160505 lb 72804 kg |
| Tractor Shipping | 93635 lb 42472 kg |
| Scraper Shipping | 64068 lb 29061 kg |
| Total Operating - Empty | 164244 lb 74500 kg |
| Front Axle | 93842 lb 42566 kg |
| Rear Axle | 66663 lb 30238 kg |
| Total Operating - Loaded | 268302 lb 121700 kg |
| Front Axle - Loaded | 134165 lb 60856 kg |
| Rear Axle - Loaded | 130340 lb 59121 kg |
| Width - Overall Machine | 14.3 ft 4.36 m |
| Width - Tractor | 11.87 ft 3.62 m |
| Width - Rear Tire Center Lines | 9.21 ft 2.81 m |
| Width - Inside of Bowl | 12.07 ft 3.68 m |
| Width - Outside Bowl - Shipping Width | 12.98 ft 3.91 m |
| Height - Overall Shipping | 15.29 ft 4.42 m |
| Height - Top of Cab | 12.77 ft 3.89 m |
| Ground Clearance - Tractor | 2.3 ft 0.7 m |
| Front of Tractor to Front Axle | 14.93 ft 3.88 m |
| Axle to Vertical Hitch Pin | 1.8 ft 0.55 m |
| Height - Scraper Blade Maximum | 2.17 ft 0.66 m |
| Wheel Base | 32.68 ft 9.96 m |
| Length - Overall Machine | 58.96 ft 17.97 m |
| Rear Axle - Rear of Machine | 8.07 ft 2.46 m |
| Width - 180° Turn - Right | 44.6 ft 13.6 m |
| Width - 180° Turn - Left | 47.57 ft 14.5 m |
| Steering Angle - Right | 90 90 |
| Steering Angle - Left | 85 85 |
| Crankcase | 13.7 gal (US) 52 l |
| Transmission | 35.9 gal (US) 136 l |
| Differential | 36 gal (US) 136 l |
| Final Drive - Each | 6.3 gal (US) 24 l |
| Cooling System | 23.4 gal (US) 88.6 l |
| Hydraulic Reservoir | 39.6 gal (US) 150 l |
| Windshield Washer | 0.5 gal (US) 5 l |
| Bowl Cylinder Bore | 7.08 in 180 mm |
| Bowl Cylinder Stroke | 37.4 in 950 mm |
| Apron Cylinder Bore | 7.08 in 180 mm |
| Apron Cylinder Stroke | 29.92 in 759.5 mm |
| Steering Circuit (@ High Idle) | 76.08 gpm 288 L/min |
| Cushion Hitch Circuit | 19.54 gpm 74 L/min |
| Secondary Steering Circuit | 14.52 gal/hr 55 l/hr |
| Relief Valve - Steering Circuit | 1959 psi 13500 kPa |
| Relief Valve - Implement Circuit | 1999 psi 13780 kPa |
| Compensator Settings - Cushion Hitch Circuit | 3002 psi 20700 kPa |
| Crankcase | 8.9 gal (US) 34 l |
| Transmission | 31.9 gal (US) 121 l |
| Cooling System | 16.6 gal (US) 63.2 l |
| Final Drive - Each | 7.8 gal (US) 30 l |
| Fuel Tank | 430 gal (US) 1628 l |
| Differential | 44 gal (US) 168 l |
უპირატესობები და მახასიათებლები
BE MORE PRODUCTIVE
- The Advanced Productivity Electronic Control System (APECS) enables communication between the engine and transmission to optimize power and torque output effectively. This integration
results in enhanced efficiency with a net result of moving more
material. - Use Ground Speed Control to set the desired top speed, and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
- The machine speed limit feature allows the machine to maintain a
set the top speed instead of relying on top gear selector. - Auto-Stall assists in quickly bringing the transmission to an
operating temperature at start-up when the machine is working in a cold climate region. - Cat Payload for scrapers is an earthmoving solution for optimal payload and jobsite efficiency. Cat Payload achieves on-the-go
weighing by using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with Sequence
Assist, which provides increased productivity with less operator
effort.
WORK IN COMFORT
- Steer with less effort with the newly designed high-pressure steering system.
- Reduce up to 14 individual operator commands per cycle with
Sequence Assist. - Enjoy interior improvements and a more ergonomic work environment
. - Intuitive, ergonomic controls with multifunction display keep operators
focused on their work. - Maintain desired cab temperature with automatic temperature control
.
DESIGNED FOR SAFETY
- Get in and out of the cab easier with the powered access ladder system.
- Enhance the operator’s awareness of site surroundings with the
Work Area Vision System (WAVS). - Convenient ground-level access to fuel fill and several maintenance points for easier
and safer service. - Seat belt indicator provides visual and audible alerts when the seat
belt is not in use.
EASY TO OPERATE
- Cat Advanced Ride Management (ARM) seat suspension reduces end stroke movement of the load cylinder for a smoother ride.
- Engine overspeed protection will automatically engage with no operator input when the machine is in eighth gear. The machine will assist in slowing the machine speed by canceling the throttle command and engaging the engine compression brake.
- The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for
all-day operation.
INTEGRATED CAT TECHNOLOGIES
- Access information anytime, anywhere with Vision Link™– use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your job site.
- Product Link™
collects machine data that can be viewed online through
web and mobile applications (optional attachment). - Hit target grade faster and more accurately with Cat Grade
technologies. Finish jobs in fewer passes and with less operator
effort, saving you time and helping to increase profit. - Monitor, manage, and enhance jobsite operations.
- Shorten the learning curve for inexperienced operators with
Sequence Assist.
სტანდარტული ტექნიკა
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
ELECTRICAL
- Alarm, backup
- Alternator, 115 amp - tractor engine
- Alternator, 65 amp - scraper engine
- Batteries Tractor (4), 12V Maintenance Free, High Output
- Batteries Scraper (4), 12V Maintenance Free, High Output
- Electrical System, 24V
- Lighting System - Tractor
- Lighting System - Scraper
- Starting Receptacle - tractor and scraper engines
-
OPERATOR ENVIRONMENT
- Air Conditioner (includes heater and defroster)
- Automotive style fuse panel with fuse puller
- Lunch box platform with holding strap
- Coat Hook
- Cup holder
- Diagnostic Connection Port (12V)
- Dome Courtesy Light
- Engine speed lock
- Fan defroster
- Gauge Group
- Horn
- Implement Control Joystick
- Rearview Mirrors
- Radio Ready
- 2 radio openings, speakers, and 5-amp converter
- ROPS Cab with Sound Suppression and Pressurization
- Static Seatbelt, 2 piece
- Scraper Engine Controls
- Seat, Air Suspension, Cat Advanced Ride Management
- Steering Wheel - tilt and telescoping
- Storage Compartment
- Transmission Hold
- Windows - sliding side
- Windshield - laminated glass
- Windshield Wiper/Washer - front and rear
- Wrist Rest/Grab Handle
-
POWER TRAIN
- Tractor
- Scraper
-
OTHER STANDARD EQUIPMENT
- Tractor
- Scraper
