Technicial Specifications
| Engine Model | C15 Cat® C15 Cat® |
| Net Power | 405 HP 302 kW |
| Rated Power (Net ISO 9249) | 405 HP 302 kW |
| Maximum Net Torque - 1,300 rpm | 1478.8 lb/ft 2005 N·m |
| Maximum Altitude - Without Derating (Tier 4 Final/Stage IV) | 9298 ft 2834 m |
| Net Power - Converter Drive - Gross Power | 435 HP 324 kW |
| Stroke | 6.7 in 171.4 mm |
| Net Power - Converter Drive - Torque Rise | 8,5% 8,5% |
| Gross Power | 435 HP 324 kW |
| High Idle Speed | 2300 r/min 2300 r/min |
| Rated Power (Net SAE J1349) | 405 HP 302 kW |
| Emissions | Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards |
| Low Idle Speed | 800 r/min 800 r/min |
| Net Power - Direct Drive - Torque Rise | 33% 33% |
| Maximum Altitude - Without Derating (Tier 3 Final/Stage IIIA Equivalent) | 9098 ft 2773 m |
| Net Power - Direct Drive - Gross Power | 412 HP 307 kW |
| Bore | 5.4 in 137.2 mm |
| Displacement | 927.6 in³ 15.2 l |
| Operating Weight | 78326 lb 35528 kg |
| Operating Weight - Tier 3 Final/Stage IIIA Equivalent | 77340 lb 35081 kg |
| Operating Weight - Tier 4 Final/Stage IV | 78326 lb 35528 kg |
| Travel Speeds - Reverse - First | 3.9 mile/h 6.2 km/h |
| Travel Speeds - Forward - First | 3.4 mile/h 5.5 km/h |
| Travel Speeds - Reverse - Third | 12.2 mile/h 19.7 km/h |
| Travel Speeds - Reverse - Second | 6.9 mile/h 11.1 km/h |
| Travel Speeds - Forward - Third | 10.7 mile/h 17.2 km/h |
| Transmission Type | Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung) Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung) |
| Travel Speeds - Forward - Second | 6 mile/h 9.7 km/h |
| Machine Sound Level (ISO 6395) | 113 dB(A) 113 dB(A) |
| Operator Sound Level - ISO 6396 | 73 dB(A) 73 dB(A) |
| Ground Clearance | 1.6 ft 492 mm |
| Length - With Blade on Ground | 28.1 ft 8561 mm |
| Height - Top of Exhaust Pipe | 14.1 ft 4290 mm |
| Hitch to Centerline of Front Axle | 6.1 ft 1850 mm |
| Turning Radius - Inside of Push Arms | 8.6 ft 2627 mm |
| Centerline of Rear Axle to Edge of Counterweight | 9.3 ft 2830 mm |
| Wheel Base | 12.1 ft 3700 mm |
| Ground Clearance - Bumper | 2.7 ft 810 mm |
| Height - Top of Beacon | 14.4 ft 4381 mm |
| Height - ROPS/Canopy | 13.3 ft 4059 mm |
| Height - Top of Hood | 10.4 ft 3162 mm |
| Width - Over Wheels | 11.98 ft 3650 mm |
| Hydraulic Tank Only | 35.4 gal (US) 134 l |
| Differential - Final Drives - Rear | 29.1 gal (US) 110 l |
| Fuel Tank | 206.6 gal (US) 782 l |
| Cooling System | 30.6 gal (US) 116 l |
| Differential - Final Drives - Front | 26.4 gal (US) 100 l |
| Transmission | 17.4 gal (US) 66 l |
| Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV) | 8.5 gal (US) 32 l |
| Engine Crankcase | 9 gal (US) 34 l |
| Oscillation Angle | ±8° ±8° |
| Rear | Planetary – Oscillating Planetary – Oscillating |
| Front | Planetary – Fixed Planetary – Fixed |
| Maximum Supply Pressure | 3495 psi 24100 kPa |
| Main Relief Pressure | 3495 psi 24100 kPa |
| Cylinders, Double Acting - Tilt, Bore and Stroke | 95.25 mm × 216 mm (3.75 in × 8.5 in) 95.25 mm × 216 mm (3.75 in × 8.5 in) |
| Pump Flow at 1,800 rpm | 30.9 gal/min 117 l/min |
| Cylinders, Double Acting - Lift, Bore and Stroke | 120 mm × 1070 mm (4.7 in × 42.1 in) 120 mm × 1070 mm (4.7 in × 42.1 in) |
| Total Tilt Adjustment | 2.9 ft 890 mm |
| Maximum Lift Above Ground | 3.14 ft 958 mm |
| Moldboard - Length | 14.4 ft 4390 mm |
| Blade Tilt Angle - Left - Mechanical | 4,1° 4,1° |
| Width - Over End Bits | 15.18 ft 4628 mm |
| Blade Tilt Angle - Left - Hydraulic | 5,4° 5,4° |
| Blade Tip Angle - Total | 14,8° 14,8° |
| Maximum Depth of Cut | 1.97 ft 602 mm |
| Height - Including Cutting Edge | 3.4 ft 1032 mm |
| Blade Tip Angle - Forward | 7,3° 7,3° |
| Blade Tilt Angle - Right - Mechanical | 5,1° 5,1° |
| Blade Tip Angle - Back | 7,5° 7,5° |
| Blade Tilt Angle - Right - Hydraulic | 6,3° 6,3° |
| Blade Tilt Angle - Left Full | 10,1° 10,1° |
| Blade Tilt Angle - Right Full | 10,8° 10,8° |
| Maximum System Flow | 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm) 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm) |
| Stroke | 22.7 in 576 mm |
| Steering System - Circuit | Double Acting – End Mounted Double Acting – End Mounted |
| Vehicle Articulation Angle | 86 degrees 86 degrees |
| Bore | 4.5 in 114.3 mm |
| Steering Pressure Limited | 3481 psi 24000 kPa |
| Steering System - Pump | Piston – Variable Displacement Piston – Variable Displacement |
| Weight | 16167 lb 7333 kg |
| Drum Width | 3.7 ft 1125 mm |
| Drum Diameter | 4.3 ft 1299 mm |
| Tips per Wheel | 65 65 |
| Width - Over Drums | 11.98 ft 3650 mm |
| Outside Diameter | 5.5 ft 1672 mm |
| Operator Sound Level - ISO 6396 | 72 dB(A) 72 dB(A) |
| Machine Sound Level (ISO 6395) | 110 dB(A) 110 dB(A) |
| Parking Brake | Drum and Shoe, Spring Applied, Hydraulic Released Drum and Shoe, Spring Applied, Hydraulic Released |
Advantages and Features
POWERFUL EFFICIENCY
- Auto shift mode, when active, allows machine to upshift or downshift based on machine speed and torque, optimizing performance and saving fuel.
- The left pedal acts as a brake, transmission neutralizer and an engine decelerator to override the engine speed selected by the throttle lock. Operators can slow down when the throttle lock is engaged and to return to throttle lock without pressing a resume or set button. Helps maneuvering around trucks, tractors or other obstacles.
- Steering and Transmission Integrated Control System (STIC™) enhances operator comfort by integrating steering and transmission control functions in a single lever. Includes finger-controlled gear selection.
- Load sensing hydraulic steering system ensures smooth steering at all speeds and engine levels.
- Variable displacement piston pumps enhance efficiency.
- Steering articulates 43 degrees each direction allowing operators precise positioning for easy operation in tight areas.
- Electro hydraulic controls help ensure responsive, predictable implement control.
- Electronically controlled hydraulic cylinder stops deliver smooth machine operation, less stress on operator.
LONG TERM VALUE AND DURABILITY
- Designed and made with purpose-built structures to remain safe and durable for the long run.
- Long-life-designs, materials and robotic welding ensure multiple life cycles and ability to withstand the toughest conditions.
- Full box-section rear frame resists torsional shock and twisting forces.
- Heavy-duty steering-cylinder mounts efficiently conduct steering loads into the frame.
PERFORMANCE WITH LESS FUEL
- Single Clutch Speed Shifting (SCSS) delivers consistent, smooth shifting and efficiency.
- Strategic use of metallurgy and heat treating ensures long-life gears.
- Torque converter with lock-up clutch eliminates drive losses, reduces system heat, improves travel speeds, and increases fuel efficiency.
- Cat C15 engine is built and tested to meet your most demanding applications.
- Two engine options are available to meet Tier 4 Final/Stage IV or Tier 3/Stage IIIA equivalent emission standards. (depending upon market).
- Fully integrated electronic engine controls work in concert with the entire machine to make fuel go farther.
- Engine Idle Shutdown reduces fuel waste during idling periods.
- Delayed Engine Shutdown maximizes durability.
OPTIMIZE COMPACTION
- Chevron Tamping Tip Design provides greater ground pressure, more compaction, excellent traction and a smooth ride.
- Compaction is achieved from the bottom of the lift to the top. The tapered tips walk out of the lift without “fluffing” the soil. The top of the lift is compacted and the surface is relatively smooth and sealed so hauling units are able to maintain a high speed when traveling over the fill.
- The 825K travel speed delivers four forces of compaction: pressure, manipulation, impact and vibration.
- This compactor also spreads fill, potentially reducing the number of spreader tractors needed for the project.
- Symmetrical tamping tip pattern delivers equal compaction in forward or reverse. Tips are full perimeter and replaceable.
- Two cleaner bars on each wheel keep drums free of carryover dirt, in forward and reverse, maximizing efficiency. Cleaner bars are available with standard or abrasive tips depending upon the application. Bars are adjustable and bar tips are heat-treated and direct-hardened cutting-edge steel to increase life.
OPERATOR COMFORT AND CONTROL
- Pressurized cab sits on isolation mounts improving comfort and reducing sound.
- Cab features a convenient floor storage tray/lunch box.
- Cat Comfort Series III Seat includes mid-back design, thick, contoured cushions, air suspension, six-way adjustments, and a seat-mounted implement pod and STIC steer that moves with the seat for optimal control.
- Control panel gives operators the information and controls for safer and time-saving settings.
- STIC control simplicity provides maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.
PRODUCTIVITY WITH TECHNOLOGY
- Cat Compaction Control system uses Machine Drive Power (MDP) technology to measure rolling resistance and correlates it with soil stiffness. MDP works in both cohesive or granular soils. Optional 3D mapping system maps compaction measurements to the precise location the operator is working, providing a real-time view of progress, and a record of compaction uniformity.
- DETECT technologies help keep people and equipment safe by keeping operator aware of the work area and by monitoring and reporting unsafe conditions, like avoidance zones.
- COMPACT technologies combine advanced compaction measurement, in-cab guidance and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and with fewer passes.
- Cat Product Link is deeply integrated into your machine, giving you access to information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink user interface. Helps effectively manage fleet and lower operating costs.
BUILT-IN SAFETY FEATURES
- Railings, ladders and non-slip surfaces enhance technician and operator safety.
- Design ensures three points of contact at all times through ground level or platform accessible service areas.
- Rearview camera with in-cab monitor increases operator awareness around the machine.
- Standard cab-mounted LED warning strobes.
- Optional heated mirrors ensure enhanced visibility for safe operation.
- Optional LED lights provide excellent workspace visibility.
- Reduced vibrations to the operator with isolated cab mounts and seat mounted implement and steering controls.
- Low interior sound levels.
- Pressurized cab with filtered air.
REDUCE ENVIRONMENTAL IMPACT
- Engine Idle Shutdown saves fuel by avoiding unnecessary idling.
- Reduce waste to the environment with maintenance-free batteries.
- The 825K is built to be rebuilt, maximizing machine life, and minimizing environmental impact. Get the most from your investment, with our sustainable options including Cat Reman and Certified Rebuild programs. With these programs, remanufactured components deliver cost savings of 40 to 70 percent, lowering operating costs while also reducing waste and minimizing the need for raw materials.
TOP-TIER SERVICE AND SUPPORT
- Safe and convenient service via ground level or platform access to daily service points.
- Swing-out doors on both sides of engine compartment provide easy access to daily service checks.
- Ecology drains for ease of service and prevention of spills.
- Reduce downtime with VIMS™ system notifications so operators and technicians can resolve problems before failure.
- Sight gauges mean quick visual inspection and minimize fluid contamination.
- Swing-out doors on both sides provide convenient access to daily service check points. Engine compartment lighting aids visibility.
- New ground level service area includes an electrical disconnect, emergency engine shutdown and stairway light switch.
- Cat dealers keep you running with preventive maintenance programs, maintenance contracts, best-in-class parts availability and operator training support.
Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
POWER TRAIN
- Air to air aftercooler
- Autoshift
- Brakes, full hydraulic, enclosed, wet multiple disc service brakes
- Cat clean emission module (Tier 4 Final/Stage IV)
- Electro-hydraulic parking brake
- Electronic Clutch Pressure Control (ECPC)
- Engine, Cat C15: – Tier 4 Final/Stage IV – Tier 3/Stage IIIA equivalent
- Fuel priming pump (electric)
- Fuel to air cooler
- Ground level engine shutoff
- Hydraulically driven demand fan
- Integrated braking system
- Muffler (under hood) (Tier 3/Stage IIIA equivalent)
- Radiator, Aluminum Modular (AMR)
- Separated cooling system
- Single Clutch Speed Shifting (SCSS)
- Starting aid (ether) automatic
- Throttle lock
- Torque converter with Lock Up Clutch (LUC)
- Transmission, planetary, with 3F/3R speed range control
-
ELECTRICAL
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance-free (4 – 1,000 CCA)
- Electrical system, 24V
- Ground level lockable master disconnect switch
- Light, warning unswitched (LED strobe)
- Lighting, access stairway
- Lighting, under hood
- Lighting system, halogen (front and rear)
- Lights, directional (rear)
- Starter, electric (heavy duty)
- Starting receptacle for emergency start
-
OPERATOR ENVIRONMENT
- 12V power port for mobile phone or laptop connection
- AccuGrade™ mapping (ready)
- Air conditioner
- Cab, sound-suppressed pressurized
- Cab door, sliding window (LH)
- Compaction control (ready)
- Coat and hard hat hooks
- Electro-hydraulic tilt and lift controls
- Finger tip shifting controls
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Implement hydraulic lockout
- Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage IV) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
- Internal four-post rollover protective structure (ROPS/FOPS)
- Laminated glass
- Light, (dome) cab
- Lunch box and beverage holders
- Mirror, internal (panoramic)
- Mirrors, heated ready
- Mirrors, rearview (externally mounted)
- Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
- Seat, Cat Comfort (cloth) air suspension
- Seat belt with minder, retractable, 76 mm (3 in) wide
- STIC control system with lockout
- Sun visor, front
- Tinted glass
- Transmission gear (indicator)
- Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles
- Wet-arm wipers/washers (front and rear)
- Intermittent wipers (front and rear)
-
TIRES, RIMS AND WHEELS
- Wheels, tamping tips
-
GUARDS
- Guard, driveshaft
- Guards, crankcase and power train
-
BLADES
- Bulldozer straight blade, hydraulics, and linkage are included in the base machine
-
FLUIDS
- Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
-
OTHER STANDARD EQUIPMENT
- Cleaner bars with teeth
- Doors, service access (locking)
- Ecology drains for engine, radiator, transmission, hydraulic tank
- Emergency platform egress
- Engine, crankcase, 500 hour interval with CJ-4 oil
- Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
- Fast fuel system
- Fire suppression ready
- Fuel tank, Fast Fill, 782 L (207 gal)
- Hitch, drawbar with pin
- Hoses, Cat
- Hydraulic, engine, and transmission oil coolers
- Oil change system, high speed
- Oil sampling valves
- Product Link
- Stairway, left and right rear access
- Steering, load sensing
- Toe kicks
- Total hydraulic filtration system
- Vandalism protection caplocks
- Venturi stack
- Fold down exhaust stack for shipping
Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
OPERATOR ENVIRONMENT
- Camera, rear vision
- Radio, AM/FM/AUX/USB/BLUETOOTH
- Radio, CB (ready)
-
TECHNOLOGY PRODUCTS
- Compaction control, basic
-
FLUIDS
- Antifreeze, –50° C (–58° F)
-
STARTING AIDS
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
-
MISCELLANEOUS
- Film (ANSI) (Tier 4 Final/Stage IV)
- EU certification (Tier 4 Final/Stage IV)
- Plate – year of manufacture (Tier 3/Stage III Equivalent)
