2337 mm (92 in), Smart

2337 mm (92 in), Smart

Cat® Dozer Blades are designed for rough and finish grading in dirt and gravel, and light dozing. With their 6-way capabilities, dozer blades are better suited for finish grade work in construction and landscaping applications.

Blade Width 92 in 2337 mm
Width - Fully Angled 80.7 in 2049 mm
Maximum Blade Angle - Right/Left of Center 30 degrees 30 degrees

ტექნიკური მახასიათებლები

Blade Width 92 in 2337 mm
Width - Fully Angled 80.7 in 2049 mm
Maximum Blade Angle - Right/Left of Center 30 degrees 30 degrees
Tilt Angle Range +/- 10 degrees 10 degrees
Blade Height 24.4 in 619 mm
Overall Height 30.9 in 785 mm
Length 40.5 in 1028 mm
Weight 1164 lb 528 kg
Cutting Edge Thickness 0.6 in 16 mm
Required Hydraulics High Flow XPS High Flow XPS
Optimal Hydraulic Flow 42-86 L/min (11-23 gpm) 42-86 L/min (11-23 gpm)
Optimal Hydraulic Pressure 145-235 bar (2100-3400 psi) 145-235 bar (2100-3400 psi)
Interface Type Skid Steer Coupler Skid Steer Coupler

უპირატესობები და მახასიათებლები

Application

Designed for rough and finish grading in dirt and gravel as well as for light dozing.

SMART Attachment

Attachment recognition makes the Smart Dozer Blade, Smart. Cat® Compact Track Loaders equipped with Smart technology recognizes the Smart Dozer attached to the machine, thus unlocking additional dedicated machine display screens allowing the operator to interface with the machine and how the attachment is controlled. As a Smart attachment, the existing joysticks on the machine equipped with Smart technology allow for mode select and pattern change to perform functions on the attachment.

VPAT Design

Track-type tractor variable power angle tilt (VPAT) design with simultaneous tilt and angling capability delivers superior control and maneuverability.

Replaceable Cutting Edge

Three-piece, replaceable, bolt-on, hardened cutting edge delivers long life and high performance.

Spill Guard

An integrated spill guard prevents material from spilling over the top of the blade in full blade scenarios.

Angled Blade Ends

Modeled after track-type tractor blades, this allows flush cutting against a vertical surface when the blade is fully tilted.

Mast Mounting Points

To accept external reference masts for use by GPS, Laser, or other leveling systems.

Removable Shims

Allows for adjustment of trunnion due to interface wear during normal usage.

OMM Container

Stores the OMM (Operation and Maintenance Manual) in a protective case on the attachment, where it can be conveniently accessed.